Achtung!! Nach-basteln ist erlaubt aber bitte nur für persönliche Nutzung. Nicht für Kommerziellen Zwecke. Danke.

Attention!! For personal use only please. Thank you.

Most of the tutorial is still in german.


Montag, 5. Mai 2014

DIY Polka-Dot Schablone. ( DIY Stencil)

Materialliste: 
Weißes Druckerpapier.
Kreisstanzer Große 1 cm oder 1,5 cm.
Wasser in einer Sprühflasche.
Heißluftgerät.

You are going to need: 
A regular white printer paper. 
A circle puncher (in size 1 cm or 1,5 cm ). 
Water in a mister. 
A heat tool.




1. Schneide das Papier in der Große 15 cm x 15 cm.

1. Cut the paper into a 6“x6“ paper piece.

2. Falte das Papier zur hälfte. 
2. Fold it in half.

3. Falte es nochmal zur hälfte.
3. Fold it again in half.

4. Stanze die Kreise auf einer Seite in einer Reihe. Ihr müsst es nicht ausmessen. Es macht nichts wenn die Reihe nicht perfekt ist.
4. Punch the circles at one side of the folded paper. There's no need to mesure it. Just eyeball it. It's ok if it's not perfect.

5. Stanze die Kreise auf der andere Seite des Papiers.
 
5. Punch the circles at the other side of the folded paper.

6. Das Papier ausfalten. Damit es flach liegt, sprühe es  mit dem Wasser.
6. Unfold all the folds. To make the stencil flat, we have to mist it with water but not to wet. Just until it's flat.


7. Trockne die Schablone mit dem Heißtluftgerät. Ihr müsst sie vom beiden Seiten trocknen ( Die vordere Seite und die hintere Seite). Beim Umdrehen bitte vorsichtig weil das papier zerrisen könnte, wenn es naß ist.

7. Dry the paper stencil using a heat tool. You have to dry it from both sides. ( The front side and the back side ). Be careful by turning the paper stencil, it might be torn easily in a wet condition.

8. Jetzt ist unsere Schablone fertig.

8. Our paper polka dot stencil is now finished.

Ihr könntet sie mehrmals verwenden zum Beispiel um einen Hintergrund zu kreieren oder für etwas anderes.
Man kann für dieses Tutorium viele andere Motivstanzer verwenden. Zum Beispiel ein Herz- oder ein Schmetterling-Motivstanzer.

You can use it as many times as you like to create a background for your projects or anything else.
This tutorial works also with some different punchers such as a butterfly puncher or a heart puncher.


Wichtige Tip: Ihr müsst die Schablone direkt nach der jeweiligen Verwendung immer wieder mit dem Heißtluftgerät trocknen. weil sie Eure Projekte ruiniern könnte wenn sie zu naß ist. Und um eine wellige Verformung zu vermeiden.

Very important tip: You have to dry the stencil with the heat gun after each used. Because it's going to ruin your project if it's too wet and also to avoid that the stencil ripples.

Ich hoffe dass dieses Tutorium könnte für Euch nützlich sein.
Viel Spaß beim Nachwerkeln. 

I hope that this tutorial is useful for you.
Happy scrapping.

1 Kommentar: